Weld Rim Help-- Please!!

[lpstangman]

I have put the drag lite rims on my 92 fox body, but there is a space on the studs, do i need the long shank lug nuts? and will those fill the gap up and make them fit perfect?

Because there is like an 1/8 inch space around each stud on the axle when i put the rim on... just want to know if those lug nuts will take up that space...

Help before i buy the lugs...

Thanks!!

[Tony]

yes those are what you need, make sure they are the right length though.

[lpstangman]

what is the right length?

i know its a 1/2 inch lug, but what length?

[Tony]

couldnt tell ya. I've never had draglites. Best thing to do would be to call summit or something and they could tell you exactly what lugnut you need. Sorry I couldnt be of more help

[Drinknbuddy]

I called summit for my lugnuts on my welds. I got the part #s back home along with the size. when I get home ill take a look and post it for you, unless someone else has already.....

[Crawlin2vGT]

7/16 ss/t mag lugs is what i believe they are.

[wojin]

if they are stock they are 1/2in studs

[Drinknbuddy]

Heres what they sent me...

http://store.summitracing.com/default.asp?Ntt=cll-l5120&searchinresults=false&Ntk=KeywordSearch&DDS=1&N=115&target=egnsearch.asp&x=38&y=7

[FoMoCoPower]

A-Team sells the correct lug nuts,I think there like $1.00 each or something like that.Thats where I got mine.Thread size is 1/2"-20

[Red89notch]

A lot of people use the McGuard long lug nuts.. They have a removeable cap at the end... You should run longer studs to be safe , but thats up to you...

[Wagon5.0]

Autozone sells the wrigh lug nuts too

[blue92]

dont forget the washers